15 Coolest 2 Morse Tapers

 

LC-21 2 Morse Taper Medium Duty Live Center

LC-21 2 Morse Taper Medium Duty Live Center

LC-21 2 Morse Taper Medium Duty Live Center - 2 morse taper shank. Centers have 60 degree point. Made of finest heat treated steel, with case-hardened housing. Built-in washer to protect bearings from grit and dust. Maximum runout of 0008″.

 

LFA  Reichel Hardware 2MT58 2 Morse Taper by 58-18 Threaded Arbor Chrome

LFA / Reichel Hardware 2MT5/8 2 Morse Taper by 5/8-18 Threaded Arbor, Chrome

LFA / Reichel Hardware 2MT5/8 2 Morse Taper by 5/8-18 Threaded Arbor, Chrome - Ground on centers to give the most accuracy between the drill chuck and machine tool. Morse taper end has tang to prevent slippage. Press fit jacobs taper, to ensure a non slip fit with drill chuck. Guaranteed to run true and balanced. Material is high grade steel and 100% hardened for long life. Made in france.

 

SL3-2 3 Morse Taperhole-2 Morse Tapershank Extension Socket

SL3-2 3 Morse Taper(hole)-2 Morse Taper(shank) Extension Socket

SL3-2 3 Morse Taper(hole)-2 Morse Taper(shank) Extension Socket - Overall length 7 3/4″. Inside (hole) 3 morse taper. Outside (shank) 2 morse taper. Allows the use of a larger morse taper tool. Soft with hardened tang.

 

34 Expanding Arbor with 2 Morse Taper Shank

3/4″ Expanding Arbor with #2 Morse Taper Shank

3/4″ Expanding Arbor with #2 Morse Taper Shank - 750) , designed to expand up to. 010 inches working length is 2-5/8 inches mounting shank is # 2 morse taper with a 3/8-16 ‘ ‘internal thread for draw bars” made from 12l14 soft machinable steel. Expanding machinable arbor working diameter is 3/4″ (.

 

SL2-1 2 Morse Taperhole-1 Morse Tapershank Extension Socket

SL2-1 2 Morse Taper(hole)-1 Morse Taper(shank) Extension Socket

SL2-1 2 Morse Taper(hole)-1 Morse Taper(shank) Extension Socket - Allows the use of a larger morse taper tool. Outside (shank) 1 morse taper. Inside (hole) 2 morse taper. Overall length 6 1/4″. Soft with hardened tang.

 

Pro Live Center Set 2 Morse Taper Pro Set

Pro Live Center Set, #2 Morse Taper Pro Set

Pro Live Center Set, #2 Morse Taper Pro Set - . These high quality live centers feature double bearing construction and precise machining for minimum vibration and long life. Set includes 9/16″ cup center, 5/8″ to 1/4″ tapered cup, 3/4″ and extended 7/16″ cone center, 1/2″ cup center with point and 1/2″ cup center with removable 5/16″ guide pin. A rare earth magnet set into the body securely holds the interchangeable centers in place. Comes complete with form fitted case.

 

Drill America DEWA0203 Qualtech Drill Chuck Arbor 2 Morse Taper Shank To 3 Jacobs Taper Pack of 1

Drill America DEWA0203 Qualtech Drill Chuck Arbor, #2 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)

Drill America DEWA0203 Qualtech Drill Chuck Arbor, #2 Morse Taper Shank To #3 Jacobs Taper (Pack of 1) - #2 morse taper shank to #3 jacobs taper. . Drill america qualtech drill chuck arbor.

 

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish 2 Morse Taper Shank 135 Degree Notch Point 58 Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size - 135 degree notch point reduces thrust forces and easier penetration. Furnished with american national standard (morse) taper shanks. Manufactured from premium 8% cobalt (m42) high-speed steel for increasing hot hardness. Heavy-duty geometry for drilling in tough, high-tensile materials under extreme operating conditions. Straw finish standard from stock and alternate coatings are available as stock modifications.

 

Hold Fast Chuck Reversing Adapter 1-14 x 8 TPI - 2 Morse Taper

Hold Fast Chuck Reversing Adapter 1-1/4″ x 8 TPI – #2 Morse Taper

Hold Fast Chuck Reversing Adapter 1-1/4″ x 8 TPI – #2 Morse Taper - Unscrew your chuck off the lathe headstock without removing your bowl, screw the reversing adapter into the chuck and install the bowl-chuck-adapter into your tailstock. By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly center your bowl on the vacuum head to finish turning perfectly centered. This chuck reversing adapter features a #2mt on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck. .

 

R8 To 2 Morse Taper Adapter

R8 To 2 Morse Taper Adapter

R8 To 2 Morse Taper Adapter - Inside taper 2 morse taper. R8 tooling for bridgeport and similar vertical milling machines. 7/16-20 drawbar thread.

 

LFA  Reichel Hardware 2MT33 2 Morse Taper by J33 Arbor Chrome

LFA / Reichel Hardware 2MT33 2 Morse Taper by J33 Arbor, Chrome

LFA / Reichel Hardware 2MT33 2 Morse Taper by J33 Arbor, Chrome - Guaranteed to run true and balanced. Ground on centers to give the most accuracy between the drill chuck and machine tool. Morse taper end has tang to prevent slippage. Material is high grade steel and 100% hardened for long life. Made in france. Press fit jacobs taper, to ensure a non slip fit with drill chuck.

 

Legacy Woodturning Pen Mandrel - 2 Morse Taper

Legacy Woodturning, Pen Mandrel – #2 Morse Taper

Legacy Woodturning, Pen Mandrel – #2 Morse Taper - The mandrel easily adapts to different length projects. This feature guarantees a perfectly concentric pen. This new mandrel features a 7mm mandrel shaft that slides through a headstock collet. . The shorter shaft reduces the likelihood of the mandrel shaft bowing. Simply mount your tubes and bushings then slide the shaft to the appropriate length and lock it in place. The collet is tightened with two 7/8″ wrenches (not included). Mandrels include 5 bushings.

 

Alfa Tools DS1605 Size 2-4 Morse Taper Drill Sleeve

Alfa Tools DS1605 Size 2-4 Morse Taper Drill Sleeve

Alfa Tools DS1605 Size 2-4 Morse Taper Drill Sleeve - Drill sleeves, also known as reducing sleeves, or shell sockets, are used to adapt taper shank tools where the drill shank is smaller than the machine spindle hole. .

 

2 Morse Taper to 6 Jacobs Taper Drill Chuck Arbor

2 Morse Taper to 6 Jacobs Taper Drill Chuck Arbor

2 Morse Taper to 6 Jacobs Taper Drill Chuck Arbor - ) & Chuck (jacobs) taper to order the correct arbor. For chucks with jacobs taper backs. ). Morse taper to jacobs taper arbors have a tang end (not available with a drawbar end. Determine both shank size (to fit into your drill press,tailstock, etc.

 

12 Robert Sorby STB250 Original Stebcentre 2 Morse Taper

1/2″ Robert Sorby #STB250 Original Stebcentre #2 Morse Taper

1/2″ Robert Sorby #STB250 Original Stebcentre #2 Morse Taper - Size refers to drive face diameter. In time critical production turning, the teeth can be backed off with the point still in place, so the workpeice can be stopped and checked without removing it from the lathe, and finished pieces and blanks can be exchanged by backing off the tail stock, rather than starting and stopping the lathe. This offers many advantages. Robert sorby. It combines a spring loaded center point with a ring of razor sharp teeth. Comes in diameters of 1/2″, 7/8″, and 1-1/4″. . Made in england. With a light setting this offers safety for the novice turner because the workpiece simply stops revolving should a dig-in occur, rather than causing kick back. By winding in the tail stock the degree of “bite” can be varied while still keeping the center point firmly located. This revolutionary spur drive center replaces tradtional spur drives and gives all the great stebcentre advantages.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.